Which build am I on?
Open Settings › Firmware updates in the app: it shows the relay's build and each target hub's. The newest build is on the Support page. Update the relay first, then the hubs.
With the OVERSIGHT app (Android)
- While the phone has internet (mobile data or home WiFi), open the app's Firmware updates (tap the relay chip at the top, then Firmware updates; a Firmware update chip also appears when a box is out of date) and tap Check for updates. The files are saved on the phone, so the range needs no internet.
- At the range, join the relay's WiFi and open Firmware updates again.
- Relay: tap Update. The relay restarts on the new build; re-join its WiFi if the phone dropped it.
- Each hub: tap Update next to it. The hub opens its own WiFi,
OVERSIGHT-HUB-<number>(same password as the relay). Join it when the app asks, tap I've joined it: continue, and re-join the relay afterwards.
With any browser (iPhone, laptop, tablet)
- While you have internet, download the files for your boxes from the Support page:
relay-<build>.binandhub-<build>.bin. Keep the names as they download. - Relay: join
OVERSIGHT, open192.168.4.1/update(or Settings › Firmware updates (browser) › Update the relay), choose the relay file and tap Install. Wait for Done. - Hub: on the relay's page, open Settings › Firmware updates (browser) › Open its update WiFi. Within about 30 seconds the hub opens
OVERSIGHT-HUB-<number>for 10 minutes. Join it, open192.168.4.1, choose the hub file and tap Install. Then re-joinOVERSIGHT.
The update page checks the file is for that kind of box before sending it. A relay file can't go on a hub, or the other way round.
If an update stops or fails
- Nothing changes on a failed update. The box keeps running its current firmware: just try again.
- Stand within a few feet of the box and keep the phone's screen on and the page open until it says Done.
- A weak link slows the transfer down rather than stopping it: damaged pieces are sent again. If it still gives up, note the message (it names what went wrong) and try again closer.
- If the app says a box's firmware is older than app updates, or an update keeps failing, use the USB backup below.
Backup: flash over USB
With the box plugged into a computer running Chrome or Edge, the Flash over USB page installs the latest firmware in about a minute. It keeps the hub's target number and the relay's settings, as long as you leave Erase device unticked. Still stuck? Email info@oversighttargets.com with the message you see.
Still stuck?
Email info@oversighttargets.com with what you see and, if you can, a photo of your setup or the app's debug export (see Sending us data). We reply within one business day.